The laboratory bench line with “C” structure is a highly configurable modular system, allowing the diversity and flexibility of solutions, according to the needs of use and the available installation space.
This laboratory bench has high mechanical resistance, resistance to corrosion, impact and abrasion, high structural and dimensional stability, smooth surfaces for easy cleaning / disinfection and with a load capacity (evenly distributed) greater than 200 kg / m2 (according to with the standard EN 13150: 2001).
To ensure the safety and needs of your space, this laboratory bench is a structure that has TÜV Rheinland and SEFA 8 Certification.
Demountable construction ensures ease of transport and installation flexibility. This laboratory bench is made of tube and steel sheet coated with thermosetting powder of epoxy-polyester resins or stainless steel. The levelers guarantee the compensation of the irregularities of the floor with the adjustment between -5mm and + 20mm.
WORKTOP ON CABINETS
Lower laboratory furniture in which the height varies according to the desired height for laboratory benches. Laboratory furniture is used for storing equipment and storing chemical substances, in accordance with EN 14727.
Safe storage and organization are one of the most important requirements in a laboratory. And the best location for this is precisely close to the work surface, even though space is often reduced. In this sense, Industrial Laborum designed lower furniture, with several standard dimensions, making the most of the work area. They serve as support for laboratory workbenches, intended for the storage of material for permanent use or for active archiving.
Furniture with SEFA 8 certification, designed and manufactured according to EN 14056 standards - Laboratory Furniture - Design and Installation Recommendations; EN 14727 - Laboratory Furniture - Storage Units for Laboratory - Requirements and Test Methods.
The line of laboratory benches with “A” structure is a modular system, developed mainly to respond to the needs of (re) configurations of a space: it is an extremely light and flexible solution. On the other hand, it does not allow intensive use.
With high mechanical resistance, resistance to corrosion, impact and abrasion, high structural and dimensional stability, smooth surfaces for easy cleaning and disinfection and with load capacity (evenly distributed) greater than 200 kg / m2 (according to EN 13150: 2001 ), this lab bench will ensure your needs are met.
A dismountable construction ensures ease of transport and installation flexibility, this laboratory bench is made of tube and steel sheet coated with thermosetting powder of epoxy-polyester resins or stainless steel. The levelers guarantee the compensation of the irregularities of the floor with the adjustment between -5mm and + 20mm.
The line of laboratory benches with “O” structure is a modular system, designed specifically for when aesthetics is the main concern. In a light and flexible structure, it is integrated in non-intensive, diversified and flexible conditions.
The lower space of the benches allows the insertion of suspended or rotated furniture, with the furniture fronts perfectly aligned with the front face of the structure. At the back of these lab benches there is a technical area where water and sewage, water, gas, electricity and data cables and pipes are housed. This area is confined, in its extension, by removable pipe cover panels, which facilitate access for maintenance operations, and at the tops by finishing panels.
These laboratory benches allow the installation of elevations with one (1) or two (2) levels of shelves, for the storage of reagents, materials and equipment, upper furniture as well as technical service distribution cells.
With high mechanical strength, corrosion, impact and abrasion resistance, high structural and dimensional stability, smooth surfaces that are easy to clean and disinfect and have a uniformly distributed load capacity of more than 200 kg / m2 (according to EN 13150: 2001 ) is a certified structure that guarantees your needs in the laboratory space.
A demountable construction ensures the ease transport and installation flexibility, made of tube and steel sheet with powder-coated thermosetting epoxy-polyester resins or in stainless steel. The levelers guarantee the compensation of the irregularities of the pavement with the adjustment between -5mm and + 20mm.
SPECIAL STRUCTURES (mobile / reinforced)
For special structures we mean all structures that support the extra needs of a laboratory, such as reinforced tables for loads greater than those recommended for other structures. Thus, Industrial Laborum presents a wide range of laboratory benches to meet all user needs.
The special structures are very adaptable and flexible, and can be customized, changed or simply idealized of the needs of the users. However we present 4 standard possibilities: Reinforced tables for high distributed loads; Mobile tables for a great flexibility in your laboratory; Height adjustable reinforced tables; Height adjustable mobile tables.
The height adjustable tables are of standard mechanical adjustment, using screws or spring pins. Nevertheless, Industrial Laborum Ibérica offers the option of electric adjustment, more comfortable and smooth, with a control for 3 predefined measurements and manual adjustment.
Customization and new product development are one of our company's brand images, always looking for new ways to satisfy our customers. These laboratory benches were specially designed for situations where robustness, mobility and versatility are the main needs, namely in support, storage and transport of equipment and heavy materials.