Hotte IndLab Eco SmartFlow
The Indlab Eco SmartFlow model is part of the Industrial Laborum Ibérica range of hoods and represents an innovative solution that does not require extraction ducts with the exclusive ERLAB technology.
A high-performance fume hood without the need for extraction ducts, due to the exclusive ERLAB filter system
This fume hood was developed for laboratories that pose a high risk to the user and the environment, with the particularity of presenting a filter system that removes the need to present extraction ducts.
This model results from the combination of the vast experience of Industrial Laborum Ibérica to provide an efficient and innovative solution.
Less energy costs
Its intelligent technology allows activating the filtering system at the indicated times.
Erlab filtering technology allows to reduce the amount of pollutants released.
With this filter system, such an expensive installation is not necessary.
Since it does not have extraction ducts, replacing this fume hood is simple.
Filter system with real-time control
The Erlab technology incorporated in our Eco Smartflow Fume Hood has a two-layer filtration system, with a built-in HEPA H14 filter, for dust absorption and Neutrodin Filters that use a multi-layer technology for transformed molecules, allowing the simultaneous absorption of solvents, acids and bases. Designed with a unique filter frame that prevents carbon shifting.
The new control panel is located on the left upright of the fume hood.
The IndLab Eco SmartFlow Fume Hood model features 2/3 schuko-type outlets (type F), 230V, IP55 protection class, two cold water valves and a gas valve, as well as a picket fixed to the service panel or on the surface of work.
The IndLab EcoSmart Flow Fume Hood has a constant air volume (VAC) system, but sometimes the air volume needs to be variable, in which case a VAC (variable air volume) system can be installed. an optimization of the energy consumption of the Fume hood.
At Industrial Laborum Ibérica we produce products adapted to our customers, hence we present different types of materials that adapt to their needs.
IndLab Fume Hood presents different materials for the different components:
— Outer structure: sheet steel or stainless steel.
— Interior Structure: compact phenolic, polypropylene, ceramic stoneware, sheet steel or stainless steel.
— Bench: Compact phenolic, polypropylene, ceramic stoneware or stainless steel.
In the Indlab Eco Smartflow Fume Hood, the controls and electrical sockets are placed on the fume hood's front panels under the worktop, with the spouts provided in panels inside the fume hood, on the deflectors. There is also the possibility of being supplied with controls and sockets on the side towers, as well as services on the sides of the interior of the fume hood.
The fume hood installation site must have a magnetothermic circuit breaker to ensure that if there are other equipment connected to the differential switch, they are not without power supply in case the fume hood needs to be maintained.
We are available to get in touch with you, as we also develop different fume hoods from those mentioned above.
Industrial Laborum Ibérica is a company with 44 years of experience in the market, which seeks to bring the quality factor to all laboratories. Through customers in the most diverse areas, such as health, education and different industries, ILI has acquired know-how that allows it to create solutions for the needs or requests of its customers. We are here to develop labs for people.